shrinkages
英
美
(shrinkage 的复数) n. 收缩, 收缩量, 减低
[化] 起皱; 收缩; 收缩量
shrinkage的复数
双语例句
- Variation in Densities and Shrinkages of Chinese Fir Wood From Plantation
杉木人工林木材密度及干缩性变异规律 - The full sintered Y-TZP had excellent mechanical properties, with bending strength of 710 MPa, fracture toughness of 4.77 MPa · m 1/ 2. During full sintering process, the shrinkages of dental crown in different spatial dimensions were equality and uniformity.
完全烧结的陶瓷材料机械性能优良，弯曲强度达到710MPa，断裂韧性达到4.77MPa·m1/2。在完全烧结过程中，各个方向收缩均匀一致。 - The shrinkages of the different composition zinc matrix alloys were measured by the self made linear shrinkage measurer.
对模具用不同配比的锌基合金进行了收缩率的测定。 - Using simulation experiment, shrinkages of injection molding parts with different thickness are studied. Simulation experiments are performed with same parameter of process condition and fixed gate dimension and position.
采用模拟实验的方法，在相同注射工艺条件下，保持浇口尺寸和位置不变，对不同厚度制品的成型收缩率进行模拟实验研究，绘制了模拟实验曲线。 - Proceeded research to the workability, mechanical property and frost resistance of concrete using the method of orthogonal test, furthermore, carried on experiment for permeability resistance 、 wear-resisting property and drying shrinkages between fly ash concrete and only mixing admixtures concrete.
采用正交试验的方法对混凝土和易性、力学性能、抗冻性进行研究，并开展粉煤灰混凝土与只掺减水剂混凝土的抗渗性能、干缩性能、耐磨性能试验。 - On the basis of temperature field numeric emulating and combining with dynamic dividing technology of melting pool isolated region, this article used G/ r~ ( 1/ 2) method to predict possible shrinkages and dispersed shrinkages that may appear in solidification process.
在一般铸件温度场数值模拟的基础上，采用G/R~（1/2）法并结合熔池孤立域的动态划分技术对凝固过程中可能出现的缩松缩孔进行了数值模拟； - Because 3D surface model contains huge number of triangles, a mesh simplification algorithm based on triangle edges shrinkages is presented in this paper to speed up the rendering in real time.
并对其生成的表面几何模型所包含三角面片数量巨大的问题，提出一种快速有效的三角形边收缩算法进行网格简化，提高了表面模型的绘制速度。 - When the magnesium alloys are welded by TIG or MIG, the metal in the seam will be oxidized acutely. Some defects such as cracks, voids and shrinkages appear.
当镁合金采用钨极氩弧焊、熔化极气体保护焊等焊接方法时，焊缝金属会剧烈氧化，产生气孔、裂纹等缺陷。 - Influence of Ram Extrusion of PTFE Product Properties and Shrinkages
聚四氯乙烯柱塞挤出工艺对制品性能及收缩率的影响 - The shrinkages of juvenile wood are higher than that of mature wood.
而幼龄材全缩率高于成熟材。